INSULATION TUBING 3-1/8in ID3/4in WALL 6

EPDM rubber-based elastomeric material is flexible, lightweight, UV resistant, and requires no outdoor weather protection. Insulation is noncorrosive to copper or stainless steel, requires no vapor barrier, and is paintable. Can be used on hot liquid heating systems, cold water plumbing, and chilled water and refrigeration lines to control condensation formation. Thermal Insulation; Type Flexible, Closed Cell; Pipe Size 3-1/8 Inch Inner Diameter; Insulation Thickness 3/4 Inch; Roll/Sheet Dimensions 6 Foot Length; Material EPDM Rubber; Maximum Temperature Rating 300 Deg F; Minimum Temperature Rating -70 Deg F; Inclusions/Features Fewer Layer; Application HVAC/R, Refrigeration, Plumbing; Applicable Standard ASTM C534/D1056, UL 181/723/94 5 V-0, NFPA 90A/90B, MIL, NYC MEA, UL (Canada and US); Thermal Conductivity 0.245; Water Vapor Transmission 0.03Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel ® Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel ® EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel ® Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation