The Premier HVAC/R Distributor for Licensed Contractors!
ISOLATOR W/ DRAIN SWT 1in ROTATING FLANG
- Ball Material: HCP Brass
- Body Material: Brass
- Color/Finish: Brass
- Dimensions: 3-1/4 in
- End Style: C x Rotating Flange
- Fitting/Connector Type: Valve
- Inlet Port: 1 in SWT
- Inlet to Outlet Length: 3-1/4 in
- IsInactive: false
- Port Type: Full
- Top to Inlet Center: 2-5/8 in
- Type: Valve with hose drain
Webstone The Isolator® Ball Valve, Series: 5141, 1 in Nominal, Compression x Rotating Flange, 600 psig WOG, 100 deg F, Full Port, Media: Water/Glycol Mixture, Lever Handle Actuator, HCP Brass Ball, 3-1/4 in Inlet to Outlet Length, 2-5/8 in Top to Inlet Center, Brass Body, Brass Trim, PTFE Seat, Stem Seal, Import
Designed for residential, commercial or industrial use with water or a glycol mixture. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing gland. Flange features a conical inlet to minimize turbulence. The rotating flange is secured by a snug-fit snap-ring that provides greater control over positioning during installation. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.
- Domestic/Import
- End Connection
- Inlet to Outlet Length
- Inlet Port
- Softgoods Material
- Trim Material
- Color/Finish
- Fitting/Connector Type
- Nominal Size
- Series
- Ball Material
- Body Material
- Application
- Specifications
- Material
- Stem Material
- End Style
- Pressure Rating
- Media
- Dimensions
- Type
- Port Type
- Seal Material
- Size
- Top to Inlet Center
- Handle Material
- Seat Material
- Temperature Rating
- Actuator Type
- IsInactive