The Premier HVAC/R Distributor for Licensed Contractors!
*** USE 51406HV-1 ***
- Ball Material: Brass HCP
- Body Material: Forged Brass
- Color/Finish: Brass
- Dimensions: 4-3/8 in
- End Style: C x Rotating Flange
- Fitting/Connector Type: Valve
- Inlet Port: 1-1/2 sweat
- Inlet to Outlet Length: 4-3/8 in
- Port Type: Full
- Top to Inlet Center: 3-1/2 in
- Type: Valve
Webstone The Isolator® Clean Brass" Ball Valve, Series: 5140, 1-1/2 in Nominal, Compression x Rotating Flange, 600 psi WOG, 100 deg F, Full Port, Media: Water/Glycol Mixture, Wing Style T-Handle Actuator, HCP Brass Ball, 4-3/8 in Inlet to Outlet Length, 3-1/2 in Top to Inlet Center, Brass Body, Brass Trim, PTFE Seat, Stem Seal, Brass, Import
Designed for residential, commercial or industrial use with water or glycol mixture. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing gland. Flanges features a conical inlet to minimize turbulence. This rotating flange is secured by a sung-off snap-ring that provides greater control over positioning during installation. Solder joint temperature rating are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have low pressure/temperature limits. Do not sliver braze or over heat valves when soldering. Bonus handle included with standard brass products only.
- Material
- Stem Material
- Color/Finish
- Trim Material
- Dimensions
- Type
- End Style
- Media
- Pressure Rating
- Nominal Size
- Inlet to Outlet Length
- Inlet Port
- Ball Material
- Body Material
- Application
- Series
- Specifications
- Port Type
- Seal Material
- Size
- Top to Inlet Center
- Handle Material
- Seat Material
- Domestic/Import
- End Connection
- Method of Manufacture
- Fitting/Connector Type
- Actuator Type
- Temperature Rating
- IsInactive