ZONE DAMPER ROUND 14in ZONEFIRST

ARD-14 MFG #: RDS-14
  • Blade Action: Circular
  • Color/Finish: Galvanized
  • Electrical Connection: 4 in Wire Lead
  • IsInactive: false
  • Motor Type: MSS Spring Return Synchronous
  • Series: RDS
  • Shape: Round
  • Timing: 30 sec Powered/8 sec Spring Return
  • Voltage: 24 vac

Zonefirst® RDS Automatic Zone Damper, 14 in Dia, Round, 24 VAC, Domestic

Zonefirst® Automatic Zone Damper, Series: RDS, 14 in Dia, Round, 24 VAC, 30 sec Powered/8 sec Spring Return Timing, Circular Blade, MSS Spring Return Synchronous Motor, 4 in Wire Lead, 0 to 150 deg F, Steel, Galvanized, Domestic

The Round Damper series is a single blade damper in a round spiral duct. This damper is complete with motor and can be ordered as a 24VAC spring return (2 Wire), Model RDS, or power open-power closed (3 Wire) Model RDM or with the NEW 12VDC Plug-In Motor, Model RDP. The RDP is used only with the plug-in zoning panels. These model numbers are followed by the size diameter in inches as shown below. These actuators are the same as on the ZD dampers above. The RDP must be used with the NEW Plug-In Zone Panels on page 2. The RDM is more often used for by-pass control. The RDS is a spring return damper used for zoning and is shipped normally open however can be easily converted to normally closed. For high pressure/velocity systems over 0.5 in. S.P. use the RDP or RDM dampers.

  • Electrical Connection
  • Domestic/Import
  • Voltage
  • Timing
  • Series
  • Blade Action
  • Motor Type
  • Temperature Rating
  • Size
  • Shape
  • Color/Finish
  • Material
  • IsInactive
4 in Wire Lead
Domestic
24 VAC
30 sec Powered/8 sec Spring Return
RDS
Circular
MSS Spring Return Synchronous
0 to 150 deg F
14 in Dia
Round
Galvanized
Steel
false